Model 200

A very cost efficient rotary boom, low pressure Travelling irrigator          

• Use for irrigation or effluent
• Minimum wind distortion
• One man operation
• Rugged construction
• Low operating pressure
• 8 Speeds - Giving 8 different application rates
• Quick shifting time
• Low operation costs
• Separate hose trailer - allows maximum flexibility when laying out and winding in hose

SPECIFICATIONS              

Boom Length                                      75 m

Wetted Width                                       to 108 m

Lane Spacings                                   98 m - 100 m

Hose Length                                       200 m of 125 mm or 200-250 or 300 m of 114mm

Hose Diameter                                  100 mm - 114 mm or 125 mm

Flow Range                                        19 - 47 l/s

Operating Pressure                          280 kpa

Boom Height                                      5.4 m

Wheel Spacings                                3.2 m

Travel Speeds                                    8

Area Covered                                     4.0 Ha - 6.0 Ha

The above figures are for reference purposes and are not binding in detail. We reserve the right to introduce changes to the specifications of the machine without prior notice.

 Roto-Rainer is Labour Efficient:

The Roto-Rainer irrigator can be set to run in any chosen direction. With the machine pulling up to 300 m length of hose; with central hydrant outlets, a 600 m run can be achieved.

When operating in strong windy conditions, coverage is still very good as the water is carried in the boom almost to the end of the water circle, and because the boom rotates a very efficient watering pattern is achieved.

Roto-Rainer's Performance:

The model 200 Rotary Boom has a maximum flow rate of 47 l/s with aa average run length of 400 m; 97 mm gross can be applied to 4.0 Ha in 23 hours. If shifted twice a day 46 mm can be applied to 8.0 Ha